3D Multilayer Zirconia Blanks
Our zirconia blocks are compatible with different kinds of CAD/CAM
system and manual system, such as Cercon system, Sirona Inlab
system, KaVo system, Wieland system and Amann Girrbach AG system.
We choose the best zirconia powder and utilize a cold isostatic
pressing system to form shapes,the main advantage of isostatic
pressing is the uniform application of pressure, which lead to a
very homogeneous density and shrinkage,yielding a very reproducible
process.The production cost by using isostatic pressing is much
higher than uniaxel dry pressing, but quality is also much
higher.We try to provide high quality ,low cost zirconia blocks for
all dental CAD/CAM milling system, support open architecture
CAD/CAM milling system. We will sell lowest price on zirconia
blocks and highest quality to all labs worldwide.
Simply to be Natural
| Layer | Proportion | Vickers Hardness(HV) | Strength(MPa) | Color | Translucency |
| Layer 1 | 30% | ≥1250 | ≥750 ,≤1250 | Shallow
↓
Deep | 43%—55% |
| Layer 2 | 15% |
| Layer 3 | 15% |
| Layer 4 | 20% |
| Layer 5 | 20% |
Characteristics:
Natural Color Transition, Pre-colored.
Top High Transmittance with Natural Gradient
Simple and Less Process of Production
Available in all classic VITA 16 shades (A1 to D4)
Indications
XTCERA 3D multilayer is intended for the fabrication and
preparation of copings, full anatomical/ full
contour crowns, bridges up to three units, inlays, and onlays for
anterior and posterior restorations.
Note:Directing arrow is marked on the label of multilayer blanks,
which points to insical surface.
Chemical Composition
| ZrO2+HfO2 | ＞94wt% |
| Y2O3 | 5.3wt% |
| AL2O3 | ＜0.5wt% |
| Other Oxides | ＜0.5wt% |
Properties
Sintering Density :6.0g/cm³
Bending Strength:≥750MPa
Vickers Hardness:1250HV
Chemical Solubility:＜100μg/m²
| Sintering step | Temperature range(℃) | Time(h) |
| paragraph 1 | 20-900 | 1.5 |
| paragraph 2 | 900-900 | 0.5 |
| paragraph 3 | 900-1530 | 4.0 |
| paragraph 4 | 1530-1530 | 2.0 |
| paragraph 5 | 1530-800 | 2.0 |
| paragraph 6 | 800-Natural cooling 100 | Draw a charge |
XTCEAR was founded in 2001,owning 20 years' R&D experience on
Zirconium Dioxide
Ceramic Material and Industrial CNC Milling Machine.
As a member of Aviation Industry of China(AVIC), XTCERA has 1400
employees and over
30,000 square meters R&D and production base.
In the past 10 years, XTCERA has sold out about 4000 units dental
milling machines and
supplied over 1,000,000 pieces of dental Zirconia blanks per year
in the global dental market.
We believe quality is the life of product and trust is the
foundation of business relation.
